August 30, 2007
1) Both Profiles and Cross Sections have Set Names. A Set Name is an identifier that InRoads places on a particular group of profiles or cross sections so that it can tell it apart from other profiles and cross sections that may be displayed in the same drawing. (pg. 118)
2) When the Zoom Factor for the Cross Section Viewer is set to 1, a single cross section is fit to the width of the CAD view. Setting it higher than 1 makes the section smaller than the view (zooms out), and a value less than 1 zooms into the cross section. (pg. 121)
3)There are two types of information that can be placed on the Cross Sections when the Create Cross Section command is run. The first is the ground line that tracks along the triangulation of the surface. The second is information that stems from the display of a Feature in a surface model. (pg. 122) |
