October 30, 2007
1) When a Cross Section Set is chosen from this or any set list, a box is placed around that set in the CAD view. The active CAD symbology determines the color, weight and line code of the box. It’s not placed in the CAD drawing, but is temporarily shown to give you a visual cue as to which set of cross section is selected. (pg. 124)
2) If a Cross Section Set doesn’t show up in the Update Cross Section command, End-Area Volume command or other similar cross section based command, a little persistence is required. Just get in and out of the command and it should eventually show up. (pg. 124)
3)InRoads ‘Display Off’ and ‘Display On’ should not be confused with turning on and off a level or layer in CAD. To all of the Update tools, Display Off means delete from the CAD view and Display On means draw that item in CAD. (pg. 235) |
