January 22, 2005
1) When creating a profile with the Source set to Graphics, the Locate lock should be set to Locate Graphics for this command to operate correctly. If the lock is set to Locate Features, the prompt will direct you to Identify Feature and then to Accept/Reject “feature name;” however, you will not then be prompted to Identify Location and so will not be able to complete the command. (pg. 370)
2) In order to display the Features on a Profile at the same time as you create it, you must also display the Surface along the triangulation by checking on that surface on the Main tab of the Create Profile dialog box. A surface’s features will only be made available in this command if it has been selected on the Main tab. If this is undesirable then use the Update Profile command to display those features. (pg. 371) |
