Issue 27

1) Offsets displayed on the Profile are established on the Advanced tab of the Surface Properties and stored with that particular surface. (pg. 105)

2) There are two types of information that can be placed on the Profile when the Create Profile command is run. The first is the ground line that tracks along the triangulation of the surface. The second type is information stemming from the display of Feature data contained within the surface model. (pg. 105)

3) The InRoads ‘Display Off’ and ‘Display On’ should not be confused with turning on and off a level or layer in CAD. To all of the Update tools, ‘Display Off’ means delete from the CAD view and ‘Display On’ means draw that item in CAD. (pg. 235)